Water Bottle For BMW F30 And F32 Models With B48 And B58 Engines
NewAftermarket

Water Bottle For BMW F30 And F32 Models With B48 And B58 Engines

SKUSBMF30ET003
In stock
R2 009per each

This listing is for Water Bottle For BMW F30 And F32 Models With B48 And B58 Engines, a coolant expansion tanks described for BMW use. Identification is important because visually similar parts may differ by model series, chassis, production date, body style, engine, axle, side, braking package or optional equipment. Use reference SBMF30ET003 when checking the part against the vehicle.

What this part does

For Water Bottle For BMW F30 And F32 Models With B48 And B58 Engines, the coolant expansion tanks role is to provide a pressurised reserve volume for coolant expansion and system filling. This explains the component’s place in the system; it does not establish a fault diagnosis or prove that a symptom has only one cause.

On the application described for Water Bottle For BMW F30 And F32 Models With B48 And B58 Engines, neighbouring components, vehicle specification and service history affect performance. A comparison of the removed item, its position and the actual vehicle is more reliable than choosing by appearance alone.

How it works and why condition matters

The coolant expansion tanks listed under reference SBMF30ET003 provide a pressurised reserve volume for coolant expansion and system filling. Its operation is affected by the condition of the connected system, the installation position and the correct specification for the vehicle. If another component caused the original failure, fitting a replacement alone may not resolve the underlying issue.

For Water Bottle For BMW F30 And F32 Models With B48 And B58 Engines, treat changes in operation as a reason to inspect the surrounding assembly, connectors, fasteners and fluid or electrical supply where applicable. Confirm the diagnosis with appropriate measurements and the vehicle repair information rather than relying on a single symptom.

Product details

The listing identifies this item as Water Bottle For BMW F30 And F32 Models With B48 And B58 Engines. Details below are restricted to product data available for this record; no material, warranty, performance grade or included accessory is assumed when it is not stated.

  • Display name: Water Bottle For BMW F30 And F32 Models With B48 And B58 Engines.
  • Part type: Coolant expansion tanks; check the exact left/right, front/rear and assembly configuration where relevant.
  • Part reference: SBMF30ET003; no dimensional or OE specification is asserted here.

Where the listing gives a cross-reference, compare the complete number and suffix with the removed part; a partial reference or a shared model name is not enough to confirm interchangeability.

Vehicle fitment list for SBMF30ET003

Only applications supported by the product’s own title, description or category data are stated. A listed chassis does not by itself confirm every engine, body, production date, trim or option.

  • 3 Series (F30), 2012–2019 is shown in the product application data for reference SBMF30ET003; match the VIN, engine, body and production date before purchase.

Fitment status: explicit application evidence is present for 3 Series (F30). Verify the exact vehicle by VIN and compare the reference before ordering.

Signs this coolant expansion tanks may need attention

Possible warning signs for reference SBMF30ET003 include cracks, coolant staining, a damaged cap seat or unexplained level loss. These signs are not conclusive proof that this particular item has failed, and several vehicle faults can produce similar behaviour.

Record when the symptom occurs and have the complete system inspected. If the issue affects braking, steering, visibility, engine temperature, oil pressure or safe door closure, avoid unnecessary driving until the vehicle has been assessed.

Installation guidance for SBMF30ET003

Before fitting Water Bottle For BMW F30 And F32 Models With B48 And B58 Engines, compare the new item with the removed component for shape, mounting points, connector, handedness and any visible part reference. Confirm the vehicle-specific repair procedure, required tools and torque values from reliable service information; none are invented in this description.

Installation of the coolant expansion tanks should be performed by a suitably equipped person. Isolate electrical power or depressurise a system only as the applicable procedure directs, support heavy components safely, protect sealing surfaces and keep dirt out of open fluid or air passages. Do not reuse single-use fasteners when the repair information requires replacement.

After fitting reference SBMF30ET003, verify secure mounting, correct routing and free movement, then check for leaks, warning lights, abnormal noise and proper function. Complete any required bleeding, calibration, coding, service reset, alignment or road test only when specified for the actual vehicle.

Installation and maintenance guidance

For Water Bottle For BMW F30 And F32 Models With B48 And B58 Engines, keep a record of the inspection, replaced components and service date. Recheck the installation after the vehicle-specific settling or service interval if the manufacturer procedure calls for it, and investigate any new noise, fluid trace, warning or handling change promptly.

Maintenance of the related system is part of protecting a replacement coolant expansion tanks: never open a hot pressurised system; inspect cap, hose connections and bleed points. Address the original cause, use compatible fluids or electrical parts where applicable, and follow the actual vehicle’s maintenance schedule.

Before you order SBMF30ET003

  • Send the full VIN and state the model, production year, engine and body style for Water Bottle For BMW F30 And F32 Models With B48 And B58 Engines.
  • Confirm whether the required position is front or rear, left or right, inner or outer, and note any trim, suspension or brake-package differences.
  • Compare the complete OE or aftermarket reference and the supplied measurements or connector details for record SBMF30ET003.
  • Ask whether all pictured or separately described fittings are included; this text does not assume extra hardware.
  • Check the installation procedure and any related components that should be inspected at the same time.

These checks reduce avoidable mismatch, but final compatibility should be established against the vehicle identification number and physical configuration.

Frequently asked questions about SBMF30ET003

Will Water Bottle For BMW F30 And F32 Models With B48 And B58 Engines fit every BMW in the named series?

No. Model series alone is not sufficient for reference SBMF30ET003; chassis, build date, engine, body and optional equipment can change the required part.

What should I send to confirm coolant expansion tanks fitment?

Provide the full VIN and a clear photograph or complete reference from the existing part. Morris Garage can check the available application information for Water Bottle For BMW F30 And F32 Models With B48 And B58 Engines before you place an order.

Can a symptom confirm that this item is faulty?

No. The signs listed for record SBMF30ET003 can have other causes, so diagnosis of the relevant system is recommended before replacement.

Need help confirming fitment?

Send the VIN and reference SBMF30ET003 to Morris Garage for help checking Water Bottle For BMW F30 And F32 Models With B48 And B58 Engines. WhatsApp 050 012 2247, or call 012 012 5132. You can also use the Find My Part page to share your vehicle details.

For this coolant expansion tanks order, free delivery applies to orders of R1,000 and above. Delivery eligibility is based on the order total and delivery terms at checkout.

1
WhatsApp
Enquire about this part →
ConditionNew
ClassificationAftermarket
Vehicle makeBMW
Side—
Position—
Selling uniteach
Stock sourceYard stock

Quick facts

TypeCooling System Parts
Vehicle makeBMW
SKUSBMF30ET003
PriceR2 009
StockIn stock
ConditionNew
DeliveryFree from R1000 (this part qualifies)
Returns7 days standard

Vehicles it fits

These vehicle applications are stated by our supplier. We never treat a matching brand as proof of fitment — confirm with your VIN before you pay.

MakeModelYearsStatus
BMWGeneral—Listed by supplier

FAQs

Is this part in stock?

Yes, it is listed as in stock. It is R2 009.

How much is delivery?

Delivery is R75 under R1 000 and free from R1 000. We ship every day before 10:00.

What is the return period?

Standard returns are 7 days. Used parts carry a 3-month guarantee.

Where can I collect?

Collect at 199 Stormvoel Road, Eastlyne, Pretoria (0186) or 173 Lynn Road, Karen Park, Pretoria (0182). Mon–Fri 08:00–17:00, Sat 08:00–13:00, Sun closed.

Customer reviews

Reviews are only shown from genuine, paid purchases. None yet for this part — we don't fabricate ratings.

Related parts

Used BMW F30 radiator
Used
Sample
BMW 3 Series F30 Radiator

Radiators · Used

Availability to confirm
R3 200