Mercedes Benz B-Class W246 Front Bumper Chrome Moulding Right 12-15
NewAftermarket

Mercedes Benz B-Class W246 Front Bumper Chrome Moulding Right 12-15

SKUMEW246FBM001
In stock
R959per each

The Mercedes Benz B-Class W246 Front Bumper Chrome Moulding Right 12-15 is listed for the application shown in the fitment details. Use the information as a starting point: vehicle generations and equipment can share a name while using different parts.

What this part does

Its role is to A bumper cover forms the visible exterior panel at the front or rear and surrounds or interfaces with nearby lamps, grille and trim. The outer cover is not a substitute for hidden impact-absorbing or structural parts. A correct match helps the connected system work as designed; however, the component should be assessed alongside related parts and the vehicle’s service information.

How it works and why condition matters

A bumper cover forms the visible exterior panel at the front or rear and surrounds or interfaces with nearby lamps, grille and trim. The outer cover is not a substitute for hidden impact-absorbing or structural parts. Correct operation matters to the connected vehicle system and to predictable performance. Wear, impact damage, contamination, electrical faults or incorrect installation can affect a replacement part, so the cause of the original failure should be identified rather than simply fitting another component.

Product details

The following details are limited to what is stated in the listing and its supplied technical data.

  • Listing name: Mercedes Benz B-Class W246 Front Bumper Chrome Moulding Right 12-15
  • SKU / part reference: MEW246FBM001
  • Additional technical specifications: not stated in the supplied product data

Vehicle fitment

Fitment to be confirmed with your VIN. Please share the VIN or registration details and SKU with Morris Garage before ordering.

Signs the part may need attention

These symptoms are prompts for inspection, not a diagnosis on their own:

  • Splits, severe scuffs, loose edges, missing sections or poor alignment after an impact indicate repair or replacement may be needed.
  • Inspect brackets and reinforcements too.
  • Damage, looseness or abnormal wear found during a routine inspection.
  • The original part no longer performs its intended function or cannot be secured correctly.

Installation and maintenance guidance

  • Confirm front/rear, trim openings, sensor cut-outs and mounting points. Repair damaged supports and test parking sensors or lamps if the area includes them.
  • Work on a cool, safely supported vehicle and use the vehicle-specific service information. If the job involves braking, steering, suspension, fuel, high voltage, refrigerant or timing components, have it handled by a suitably qualified technician.
  • After installation, check fasteners, routing, clearances and the system’s operation before returning the vehicle to normal use.

Before you order

  • Compare the replacement with the removed part, including its shape, connector, mounting points and position.
  • Check adjoining components for damage or wear; replacing this item alone may not correct an underlying fault.
  • Where a warning light or unusual behaviour is involved, confirm the diagnosis before buying parts.
  • Confirm the exact chassis, production year, engine and equipment using the VIN where relevant.
  • Check whether the listing specifies left/right side, front/rear position, motor, connector or included accessories.
  • Use the SKU shown above when asking Morris Garage to verify the application.

Frequently asked questions

How do I know this is the correct part?
Match the SKU, original part and vehicle details. When there is any uncertainty, share the VIN or registration details with Morris Garage before ordering.

Are extra fittings or related parts included?
Only items expressly listed in the product data are confirmed. Do not assume that bolts, clips, seals, sensors, bulbs or other accessories are included.

Need help confirming fitment?

Send your VIN or registration details and the SKU to Morris Garage on WhatsApp 050 012 2247, call 012 012 5132, or use the Find My Part page. We can help check the vehicle application before you place an order.

Free delivery is available on orders of R1,000 and above. Confirm delivery eligibility and order details with Morris Garage before checkout.

This listing is for Mercedes Benz B-Class W246 Front Bumper Chrome Moulding Right 12-15 (SKU MEW246FBM001); use these exact listing details when checking the replacement part.

1
WhatsApp
Enquire about this part →
ConditionNew
ClassificationAftermarket
Vehicle makeMercedes-Benz
Side—
Position—
Selling uniteach
Stock sourceYard stock

Quick facts

TypeFront & Rear Bumpers
Vehicle makeMercedes-Benz
SKUMEW246FBM001
PriceR959
StockIn stock
ConditionNew
DeliveryR75 under R1000, free from R1000
Returns7 days standard

Vehicles it fits

These vehicle applications are stated by our supplier. We never treat a matching brand as proof of fitment — confirm with your VIN before you pay.

MakeModelYearsStatus
Mercedes-BenzGeneral—Listed by supplier

FAQs

Is this part in stock?

Yes, it is listed as in stock. It is R959.

How much is delivery?

Delivery is R75 under R1 000 and free from R1 000. We ship every day before 10:00.

What is the return period?

Standard returns are 7 days. Used parts carry a 3-month guarantee.

Where can I collect?

Collect at 199 Stormvoel Road, Eastlyne, Pretoria (0186) or 173 Lynn Road, Karen Park, Pretoria (0182). Mon–Fri 08:00–17:00, Sat 08:00–13:00, Sun closed.

Customer reviews

Reviews are only shown from genuine, paid purchases. None yet for this part — we don't fabricate ratings.

Related parts

Used Mercedes C-Class left door mirror
Used
Sample
Left (driver)
Mercedes-Benz C-Class W205 Door Mirror — Left

Mirrors · Used

Low stock
R1 450
Mahindra XUV300 front bumper
Used
Sample
Mahindra XUV300 Front Bumper

Bumpers · Used

Low stock
R1 750