Chrysler 300C Front Lower Control Arm Right 16.85mm Pin 05-12
NewAftermarket

Chrysler 300C Front Lower Control Arm Right 16.85mm Pin 05-12

SKUCHR300CCA001
In stock
R1 539per each

The Chrysler 300C Front Lower Control Arm Right 16.85mm Pin 05-12 is associated with Chrysler 300c, 2005–2012 and the application notes below. Check the stated side, location and measurements against the original part, since suspension designs can change within a model range.

What this part does

A control arm contributes to the way the vehicle responds over uneven roads: it locates the wheel relative to the chassis while allowing controlled up-and-down suspension travel. Correct fit and sound adjoining components help the assembly operate as intended.

How it works

How the component behaves depends on its design and the rest of the vehicle. its pivots and ball-joint connection guide wheel movement; the exact arrangement depends on the vehicle. A correct replacement should match the original mounting arrangement and the specified side or axle; changing one part does not automatically resolve faults elsewhere.

Product details

Product name: Chrysler 300C Front Lower Control Arm Right 16.85mm Pin 05-12

Part number: CHR300CCA001

Read the identifiers as stated, not as a guarantee of universal fit. The part number is useful when checking the correct side, design and vehicle revision with Morris Garage. Product name identifiers include Front, Lower, Right, 85mm.

  • Position stated: front, lower, right
  • Dimensions stated: 85mm

Vehicle fitment

The product name identifies its location as front, lower, right. Check that orientation against the vehicle and removed part.

Application indicated: Chrysler 300c, 2005–2012. The make and model are supported by the vehicle category; the stated product text also identifies the details shown above. No chassis code or engine is added unless it appears in the product information. Verify exact fit using the VIN, especially where trims, production dates or drivetrains differ.

Signs the part may need attention

Arrange an inspection if you notice Clunks over bumps, vague steering, uneven tyre wear, visible play or a damaged arm or joint are reasons for inspection. A bent arm, worn bush or failed joint can affect alignment and safe control. A technician should check the neighbouring parts and verify the diagnosis before replacement, particularly where steering or wheel control is affected.

Installation and maintenance guidance

Before installation, compare the old and new parts for side, axle position, length, mounting type, thread and included hardware. Follow vehicle-specific service information and use the correct tools and torque values; do not estimate tightening values. Suspension work can involve loaded springs and components that affect steering or wheel control, so have a suitably equipped technician perform the job when needed. Replace paired components together only when inspection or manufacturer guidance calls for it. Once fitted, check fasteners, clearances, boots and routing, then arrange wheel alignment whenever steering or geometry has been disturbed. Recheck for noise or abnormal movement after the initial drive.

Before you order

Before you order, compare the replacement with the removed part and check:

  • Make, model, production year and VIN; confirm chassis or engine only where documented.
  • Front/rear and left/right orientation; this item is identified as front, lower, right.
  • Mounting points, joint or bush design, dimensions, threads and any included bearing or hardware.
  • Whether the product is sold individually or as a pair, where that is stated in the product name.
  • The condition of adjoining suspension and steering parts and the cause of the original fault.

Do not assume that bolts, bushes, bearings or related components are included unless they are explicitly identified. If any detail differs, pause and confirm the application with the VIN.

Frequently asked questions

How can I confirm it fits?
Match the product identifiers and stated position with your vehicle details. Send the VIN or registration details to Morris Garage if anything is uncertain.

Does the product include other parts?
Only items expressly named in the product information are confirmed. Check whether the part is sold individually or as a pair and whether separate mounts, bearings or fasteners are needed.

Should I replace related parts at the same time?
That depends on inspection findings and vehicle-specific service guidance. Ask a qualified technician to assess the connected components and follow the vehicle maker’s instructions.

Need help confirming fitment?

Send your VIN or registration details and the part number to Morris Garage on WhatsApp 050 012 2247, call 012 012 5132, or use the Find My Part page to check fitment before ordering. Free delivery is available on orders of R1,000 and above; confirm delivery details at checkout.

1
WhatsApp
Enquire about this part →
ConditionNew
ClassificationAftermarket
Vehicle makeChrysler
Side—
Position—
Selling uniteach
Stock sourceYard stock

Quick facts

TypeControl Arms & Ball Joints
Vehicle makeChrysler
SKUCHR300CCA001
PriceR1 539
StockIn stock
ConditionNew
DeliveryFree from R1000 (this part qualifies)
Returns7 days standard

Vehicles it fits

These vehicle applications are stated by our supplier. We never treat a matching brand as proof of fitment — confirm with your VIN before you pay.

MakeModelYearsStatus
ChryslerGeneral—Listed by supplier

FAQs

Is this part in stock?

Yes, it is listed as in stock. It is R1 539.

How much is delivery?

Delivery is R75 under R1 000 and free from R1 000. We ship every day before 10:00.

What is the return period?

Standard returns are 7 days. Used parts carry a 3-month guarantee.

Where can I collect?

Collect at 199 Stormvoel Road, Eastlyne, Pretoria (0186) or 173 Lynn Road, Karen Park, Pretoria (0182). Mon–Fri 08:00–17:00, Sat 08:00–13:00, Sun closed.

Customer reviews

Reviews are only shown from genuine, paid purchases. None yet for this part — we don't fabricate ratings.

Related parts

Haval Jolion front shock absorber
Used
Sample
Left (driver)
Haval Jolion Front Shock Absorber — Left

Shock Absorbers · Used

In stock
R950